常用金屬材料介紹
常用金屬材料簡介表
CHARACTERS OF MATERIALS
 |
材質：鋁 製造方式：拉制、擠制、壓制、鑄造 處理方式：烤漆、粉體、陽極處理、注漆、印刷、波麗 通用部位：鞋眼、飾釦 優點：金屬穩定性高，價格適中，重量較輕 缺點：材質較軟。表面處理無法電鍍成古銅色系的顏色 MATERIAL：ALUMINUM MOLD KINDS：WIRE FORMING, FLEXTION,STAMPING FINISH：PAINTING, DYE,ANLODIZIG, PRINTING, POLY, FILLED FUNCTION：EYELET, DECORATIVE LOGO BUTTON ADVANTAGE：STABLE, LOW COST, WEIGHT LIGHT DISADVANTAGE：TOO SOFT, CAN'T BE DONE ANTI-BRASS FINISH |
 |
材質：銅 製造方式：拉制、擠制、壓制、鑄造 處理方式：烤漆、粉體、電鍍、注漆、印刷、波麗、PU 通用部位：鞋眼、鞋釦、飾釦、鉚釘、帶釦 優點：金屬穩定性高，適合各部份的金屬釦及各種表面處理 缺點：價格較貴，拉力稍嫌不足 MATERIAL：COPPER MOLD KINDS：WIRE FORMING, FLEXTION, STAMPING, CASTING FINISH：PAINTING, DYE, ELECTROPLATING, PRINTING, POLY FILLED, PU FILLED FUNCTION：EYELET, RIVET, BUCKLE, HOOK, DECORATIVE LOGO BUTTON...ETC ADVANTAGE：STABLE, USED ON ALL KINDS OF PRODUCT DISADVANTAGE：MORE EXPENSIVE, POOR STRENGTH |
 |
材質：鐵 製造方式：拉制、鍛造、壓制 處理方式：烤漆、粉體、電鍍 通用部位：鞋眼、鞋釦、鉚釘、帶釦 優點：價格便宜，硬度佳，拉力好，也可利用熱處理增強其硬度 缺點：極易氧化(生銹) MATERIAL：IRON MOLD KINDS：WIRE FORMING, STAMPING, FORGING FINISH：PAINTING, DYE, PRINTING, ELECTROPLATING FUNCTION：EYELET, BUCKLE, RIVET, BELT BUTTON ADVANTAGE：LOW COST, GOOD HARDNESS, HIGH STRENGTH, USUALLY USE HEAT, TREATING TO INCREASE HARDNESS DISADVANTAGE：OXIDIZING EASILY |
 |
材質：鋅 製造方式：鑄造 處理方式：烤漆、粉體、電鍍、注漆、印刷、波麗 通用部位：飾釦、帶釦、鞋釦 優點：適合制成各種形狀或花紋 缺點：金屬延展性差且易斷裂 MATERIAL：ZINC MOLD KINDS：CASTING FINISH：PAINTING, DYE, ELECTROPLATING FUNCTION：EYELET, BUCKLE, BELT BUTTON ADVANTAGE：CAN BE MADE OF ALL, SHAPES OF PRDUCT DISADVANTAGE：POOR TENSILE, BROKEN EASILY |
 |
材質：尼龍、TPU, PU, PVC, PC, 塑鋼等塑膠類 製造方式：鑄造、注膠 處理方式：大部份是加入色粉或原材質原色，少部份再加上真空電鍍或印刷 通用部位：飾釦、眼釦、商標、帶釦 優點：製造簡易，價格適中 缺點：不能做為電鍍之處理 MATERIAL：NYLON, TPU, PU, PVC, PC, POM...ETC MOLD KINDS：INJECTION FINISH：ADDING COLORANT TO MAKE COLORFUL FINISH, PAINTING FUNCTION：EYELET, BUCKLE, LABEL, TRADE MARK...ETC ADVANTAGE：EASILY TO MAKE, LOW COST DISADVANTAGE：ELECTROPLATED TREATMENT |